diff --git a/README b/README
index eb86eba..132650e 100644
--- a/README
+++ b/README
@@ -3740,7 +3740,7 @@
 locked as (mis-) used as memory, etc.
 
 	Chris Hallinan posted a good summary of these issues to the
-	u-boot-users mailing list:
+	U-Boot mailing list:
 
 	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
 	From: "Chris Hallinan" <clh@net1plus.com>
@@ -3950,7 +3950,7 @@
 
 	Download latest U-Boot source;
 
-	Subscribe to u-boot-users mailing list;
+	Subscribe to u-boot mailing list;
 
 	if (clueless) {
 		email ("Hi, I am new to U-Boot, how do I get started?");
@@ -4027,10 +4027,11 @@
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
-Patches shall be sent to the u-boot-users mailing list.
-
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
+Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
+see http://lists.denx.de/mailman/listinfo/u-boot
+
 When you send a patch, please include the following information with
 it:
 
@@ -4093,7 +4094,7 @@
   disabled must not need more memory than the old code without your
   modification.
 
-* Remember that there is a size limit of 40 kB per message on the
-  u-boot-users mailing list. Bigger patches will be moderated. If
-  they are reasonable and not bigger than 100 kB, they will be
-  acknowledged. Even bigger patches should be avoided.
+* Remember that there is a size limit of 100 kB per message on the
+  u-boot mailing list. Bigger patches will be moderated. If they are
+  reasonable and not too big, they will be acknowledged. But patches
+  bigger than the size limit should be avoided.
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index cf14560..89e6ee7 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -211,7 +211,11 @@
 /* deregistering the keyboard */
 int usb_kbd_deregister(void)
 {
+#ifdef CONFIG_SYS_DEVICE_DEREGISTER
 	return device_deregister(DEVNAME);
+#else
+	return 1;
+#endif
 }
 
 /**************************************************************************
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
index 2fdd2b0..3985264 100644
--- a/doc/README.qemu_mips
+++ b/doc/README.qemu_mips
@@ -17,19 +17,103 @@
 start it:
 # qemu-system-mips -M mips -pflash flash -monitor null -nographic
 
+2) Download kernel + initrd
+
+On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
+you can downland
+
+#config to build the kernel
+qemu_mips_defconfig
+#patch to fix mips interupt init on 2.6.24.y kernel
+qemu_mips_kernel.patch
+initrd.gz
+vmlinux
+vmlinux.bin
+System.map
+
+4) Generate uImage
+
+# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
+
+5) Copy uImage to Flash
+# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
+
+6) Generate Ide Disk
+
+# dd of=ide bs=1k cout=100k if=/dev/zero
+
+# sfdisk -C 261 -d ide
+# partition table of ide
+unit: sectors
+
+     ide1 : start=       63, size=    32067, Id=83
+     ide2 : start=    32130, size=    32130, Id=83
+     ide3 : start=    64260, size=  4128705, Id=83
+     ide4 : start=        0, size=        0, Id= 0
+
+7) Copy to ide
+
+# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
+
+8) Generate ext2 on part 2 on Copy uImage and initrd.gz
+
+# Attached as loop device ide offset = 32130 * 512
+# losetup -o 16450560 -f ide
+# Format as ext2 ( arg2 : nb blocks)
+# mke2fs /dev/loop0 16065
+# losetup -d /dev/loop0
+# Mount and copy uImage and initrd.gz to it
+# mount -o loop,offset=16450560 -t ext2 ide /mnt
+# mkdir /mnt/boot
+# cp {initrd.gz,uImage} /mnt/boot/
+# Umount it
+# umount /mnt
+
+9) Set Environment
+
+setenv rd_start 0x80800000
+setenv rd_size 2663940
+setenv kernel BFC38000
+setenv oad_addr 80500000
+setenv load_addr2 80F00000
+setenv kernel_flash BFC38000
+setenv load_addr_hello 80200000
+setenv bootargs 'root=/dev/ram0 init=/bin/sh'
+setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
+setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
+setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
+setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
+setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
+setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
+setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
+setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
+setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
+setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
+setenv bootcmd 'run boot_tftp_flash'
+
+10) Now you can boot from flash, ide, ide+ext2 and tfp
+
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
 II) How to debug U-Boot
 
 In order to debug U-Boot you need to start qemu with gdb server support (-s)
 and waiting the connection to start the CPU (-S)
 
-# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic
+# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
 
 in an other console you start gdb
 
 1) Debugging of U-Boot Before Relocation
 
 Before relocation, the addresses in the ELF file can be used without any problems
-buy connecting to the gdb server localhost:1234
+by connecting to the gdb server localhost:1234
 
 # mipsel-unknown-linux-gnu-gdb u-boot
 GNU gdb 6.6
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba05b76..94a65d4 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -460,8 +460,8 @@
 	struct nand_chip *chip = mtd->priv;
 
 	if (!(chip->options & NAND_BBT_SCANNED)) {
-		chip->scan_bbt(mtd);
 		chip->options |= NAND_BBT_SCANNED;
+		chip->scan_bbt(mtd);
 	}
 
 	if (!chip->bbt)
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index f028d1a..8444462 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -150,7 +150,7 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /* Address and size of Primary Environment Sector */
 #define CONFIG_ENV_SIZE		0x8000
diff --git a/include/devices.h b/include/devices.h
index 6b78d58..20ddfc4 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -91,7 +91,9 @@
  */
 int	device_register (device_t * dev);
 int	devices_init (void);
+#ifdef CONFIG_SYS_DEVICE_DEREGISTER
 int	device_deregister(char *devname);
+#endif
 struct list_head* device_get_list(void);
 device_t* device_get_by_name(char* name);
 device_t* device_clone(device_t *dev);